Description The whitewater filter is used for solid-liquid separation. It uses a high flow rate, fine filter screen, and centrifugal screening to remove suspended particles with a diameter larger than the pore size of the filter screen without being affected by particle density. Working Principle…
Description The water-cutting solid-liquid separator is an advanced equipment for solid-liquid separation based on large-scale aquaculture water for flushing manure, blisters manure, and biogas slurry and residue. It integrates water cutting, high-frequency vibration and screw extrusion. The electrical control of the equipment is highly automated,…
Description There are many types of disc centrifuges, but in terms of the essence of their separation process, they can be basically divided into two processes: centrifugal clarification and centrifugal separation. The disc centrifuge can quickly and continuously separate solid-liquid and liquid-liquid, and is a…
Description Horizontal Decanter Centrifuge is a device that uses the principle of centrifugal sedimentation to separate the suspension. For various suspensions with solid particle equivalent diameter=3um, weight concentration ratio: 10% or volume concentration ratio=70%, liquid-solid specific gravity difference: 0.05g/cm3. It is suitable for liquid-solid separation…
Description The Mechanical Bar Screen (called grille as well) is usually composed of a set of parallel grilles, which are angled to the inlet of the pumping station catchment. Its tilt angle is 60 to 80 degrees. Working Principle Technical data 1. Equipment and rake…
Description Vibro Screen Separator is a high-precision fine powder screening machine with low noise and high efficiency. It takes 3-5 minutes to quickly change the screen. Vibro Screen Separator has a fully enclosed structure and is suitable for screening and filtering particles, powder, mucus and…
Description The Dissolved Air Flotation generates a large number of fine bubbles in the water. The air is attached to the suspended particles in the form of highly dispersed tiny bubbles, resulting in a state where the density is less than that of water. The principle…
Description In order to obtain a higher solid recovery rate and a lower water content of the sludge cake, the sludge from the sludge tank is often added with PAM (flocculant) solution before it is dewatered in the centrifuge or screw press. It is also considered to be added…
Description The Sludge Screw Press adopts a multi-overlap spiral filter press method, which has the features of self-cleaning filter slits, no block, saves water and electricity and durable. It creates a direct dewatering of low-concentration sludge (2000mg/L～), and can realize 24-hour continuous unmanned operation, while…
Description The pneumatic scraper type self-cleaning filter automatically removes the particulate impurities on the surface of the filter element through an efficient mechanical scraping method. It can perform continuous online filtration on a single machine, without producing filtration consumables, and without frequent manual cleaning. It…